DrayTek PQ1070x Managed L2 2.5G Ethernet (100/1000/2500) Power over Ethernet (PoE) Black
- 5 x RJ-45 2.5 Gigabit Ethernet Ports
- 2 x SFP+ 10GbE Ports for Uplink / Fibre
- Compact form factor
- Wall Mountable
- Fanless (Silent) Operation
DrayTek PQ2300XB Managed L2+ 2.5G Ethernet (100/1000/2500) Power over Ethernet (PoE) 1U BlackSKU418600MPN: PQ2300XB-KUPC: 4710484748683Quantity Discounts Available
VigorSwitch PQ1070x
5 Port 2.5 GbE 2 Ports 10Gbps SFP+ Switch with PoE+
VigorSwitch PQ1070x is a small, high-performance 2.5 Gigabit Ethernet switch with 5 x 2.5-Gigabit RJ-45 LAN ports and 2 x 10-Gigabit SFP+ interfaces. Use the faster 2.5 GbE ports for high-speed connections between switches, servers, and wireless access points such as the VigorAP 1062C. The 10Gb SFP+ interfaces are an ideal option for uplinks to connect to a router or another switch.
This lightweight, low-power network switch is easy to deploy. It’s fanless operation makes it a great match for small office/desk environments.
10GbE SFP+ Ports for High Speed Uplinks
The DrayTek VigorSwitch PQ1070x has 2 dedicated SFP+ ports for uplinks, each operating at up to 10 Gigabits per second. The faster 10 Gigabit uplink capability allows you to make high bandwidth links to Network Attached Storage, Servers and other switches, to help reduce the risk of bottlenecks occurring within your network.
The SFP+ ports provide compatibility with your choice of SFP / SFP+ modules (not included) and therefore the most appropriate medium for your application.
Connect a passive Direct Attach SFP+ cable such as the DrayTek DAC-CX10-01M to the SFP+ module port of 1Gbps/10Gbps capable Network Attached Storage, Servers and Switches, for a cost-effective, up to 10Gbps network link.
Power over Ethernet
The VigorSwitch PQ1070x is a 5-port PoE (Power over Ethernet) switch, providing power on all ports to any PoE-enabled device, such as IP phones, wireless access points or IP cameras over the Ethernet cable.
As well as removing the need for local (at the desk) power supplies, making for tidier installations, PoE ensures power efficiency, providing only the power needed.
Power is provided only when required and allows for installation of devices where there is no mains power, particularly useful for wireless access points such as the ceiling mounted VigorAP 1062C.
The VigorSwitch PQ1070x has 5 PoE 2.5GbE ports with a power budget of up to 75W for all connected PoE devices. The Ethernet interfaces are High-Power 802.3at PoE+ and regular PoE (802.3af) capable. Each can provide up to 30 watts per port.
Multi-Gigabit Ethernet
The PQ1070x series switches come with 2.5 Gigabit Ethernet ports that can increase throughput of your core network.
This cost affective, and future-proof option, where CAT 5E or later cabling might be challenging to upgrade, is an ideal solution for existing infrastructure. Reduce the bottleneck effect by connecting Wi-Fi 6 access points, NAS drives and other demanding devices including gaming equipment to the faster multi-Gigabit ports.
Energy Efficient Ethernet
The VigorSwitch PQ1070x supports Energy Efficient Ethernet, to lower the overall power usage of the switch when ports are idle or disconnected.
The IEEE 802.3az standard allows individual Ethernet links to enter a low power state, when not transmitting or not plugged in, drawing less energy than if the ports were to run at full speed at all times.
