Vigor 2763ac SoHo Router firewall with 802.11ac Wi-Fi

SKU
285579
MPN
V2763AC-K
The DrayTek Vigor 2763 series VDSL and Ethernet VPN routers are ideal for Small Office and Home Office networks. Featuring powerful Firewall and Content Filtering, configurable Quality of Service and an array of VPN capabilities, with the performance to make full use of FTTP Fibre Broadband. Incorporating Wireless in the V2763AC-K, the Vigor 2763 series provides a reliable, highly integrated and reliable connectivity solution for SoHo networks.
  • VDSL2 (Superfast Fibre) or Gigabit Ethernet WAN Router with Failover
  • Up to 950Mbps Firewall Throughput for Ethernet WAN
  • 4 Gigabit LAN Ports
  • 4 LAN Subnets with VLANs (Port-based / 802.1q)
  • SPI Firewall and Content Filtering
Enquiry

The Ideal SoHo VPN Router for VDSL and Gigabit Fibre

The DrayTek Vigor 2763 series VDSL and Ethernet VPN routers are ideal for Small Office and Home Office networks. Featuring powerful Firewall and Content Filtering, configurable Quality of Service and an array of VPN capabilities, with the performance to make full use of FTTP Fibre Broadband.

Incorporating Wireless in the Vigor 2763ac model, the Vigor 2763 series provide a reliable, highly integrated and reliable connectivity solution for SoHo networks.

DrayTek Vigor 2763 series

VDSL and Ethernet Router

DrayTek Vigor 2763 Router Interfaces

The Vigor 2763 is a VDSL or Ethernet WAN router with Gigabit performance, allowing you to make full use of DrayTek's advanced feature set, with Quality of Service, VPN and Content Filtering. Connect the Vigor 2763 to Superfast Fibre with its integrated VDSL modem. Or connect to VirginMedia Cable and Ultrafast FTTP with Ethernet WAN.

Either connection, or a 4G USB modem can be used as the primary or Failover connections, so that if the main Internet connection goes down, the Vigor 2763 can use its backup connections to guarantee reliable Internet access and VPN connectivity.

Route Policy - Routing Management for WAN & VPN

The Vigor 2763 series provides full policy-based control of where and how outbound traffic is routed with Route Policy, to send traffic through VPN services and alternative LAN gateways:

VPN Routing
Send all or select traffic through VPN services.
Hostname Routing
Route access to individual websites, Internet domains (i.e. www.bbc.co.uk) and hostnames through a VPN tunnel or a specific WAN.
Service Routing
Push specific services or ports, such as DNS, through a set WAN, an alternative Gateway or VPN Tunnel.
Failover & Failback
Extensive control of Failover with multiple Failover rules and paths. Manage how connections are moved back to the primary connection, after a failover has occurred with Failback settings.

Powerful SoHo VPN Router

DrayTek's Vigor routers feature extensive VPN (Virtual Private Networking) capabilities. The Vigor 2763 series is no exception, its VPN capabilities are well suited to SoHo (small office, home office) environments. A VPN enables you to link remote offices and branch offices back to HQ, or home-based/mobile teleworkers back to your office.

The Vigor 2763 allows you to make full use of Fibre broadband with VPN. Up to 150 Mbps of IPsec VPN throughput for fast and secure connections, to VPN services and other offices.

Connect 2 VPN tunnels concurrently to access remote resources securely. Connect the Vigor 2763 in a branch office or home office to a head office for seamless access to network resources.

DrayTek VPN Features

It supports all common industry standard VPN protocols, for it to connect to VPN services, link remote offices and handle connections from all types of VPN clients. Supporting IPsec IKEv1 & IKEv2 protocols with EAP and XAuth authentication, DrayTek's SSL VPN and L2TP for both LAN to LAN and Dial-In teleworker VPNs. In addition, teleworkers can connect to the router with OpenVPN.

User management for Dial-In Teleworkers is managed through the router's web interface, with mOTP 2-factor authentication available for IPsec, L2TP and SSL VPN Teleworker connections.

Connecting Remote Sites with LAN to LAN VPN

DrayTek VPN Features

Supporting up to 2 concurrently active VPN tunnels and 150 Mbps of IPsec VPN throughput, the Vigor 2763 series is ideal as a branch-office or home-office router, to connect with a head office router such as the Vigor 3910.

Once connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing and seamless access to other resources and devices.

DrayTek SSL VPN for Dial-In Teleworkers & LAN to LAN

Connect up to 2 DrayTek SSL VPN tunnels. These encrypted tunnels securely link teleworkers or remote DrayTek Vigor routers back to your main office using SSL/TLS technology - similar to the HTTPS security that's used for most secure websites on the internet such as on-line banking and shopping services.

Teleworkers can connect with a secure SSL VPN tunnel to the DrayTek Vigor 2763, using the free DrayTek Smart VPN Client app. Available for Windows, macOS, Apple iOS (iPad, iPhone) and Android devices.

Download the SmartVPN client and learn more about DrayTek SSL VPNs here.

DrayTek SSL VPN

Connect VPNs from behind NAT with DrayTek's VPN Matcher

DrayTek VPN Matcher system

A typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public Internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN server may be impossible.

DrayTek's new VPN Matcher service helps DrayTek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two DrayTek VPN routers that are behind NAT and could not normally establish a VPN tunnel.

Connect an OpenVPN Teleworker to a DrayTek router behind NAT

Connect two DrayTek router's behind NAT with a LAN-to-LAN VPN

AC1300 Wireless LAN with Mesh

The Vigor 2763ac provides Wi-Fi 5 (802.11ac) simultaneous Dual-Band wireless for fast and efficient wireless connectivity. Multi-User MIMO allows the router to send to more than one device at a time, with each of its Antennas streaming data to different devices at once, improving efficiency over standard 802.11ac wireless and allowing the router to effectively serve more wireless clients.

The Vigor 2763 'ac' wireless router can be used as part of DrayTek's Mesh wireless system, allowing the router to work as the Mesh Root, providing Internet access and management of Mesh VigorAPs directly.

DrayTek Mesh Wireless

4 Gigabit LAN Ports with VLANs

The Vigor 2763 series provides 4 Gigabit LAN ports for wired links to Computers, Servers and Network Attached Storage.

Up to four LAN subnets and VLANs allow the Vigor 2763 to manage guest networks that are fully separated from internal networks and data. Or any other configuration that can use up to four subnets, whether that's a separate LAN subnet to isolate printers, IoT and other smart devices from computers and servers, or simply providing multiple IP networks through the one router. Each network can have its own Content Filtering, Firewall, Quality of Service and Route Policy configurations.

Vigor 2763 routers have full support for 802.1Q VLAN tagging, so that these subnets can be passed to other devices that support tagged VLANs. Such as the DrayTek VigorSwitch G2100 10-port switch, for additional network ports and features. 

The Wireless LAN can also utilise VLANs, making the same Guest & Private networks possible simply by using different wireless SSIDs. Or connect up a DrayTek VigorAP wireless access point, such as the VigorAP 903 to do the same, spanning the router's own wireless and any connected wireless APs. VLANs can run over a DrayTek Mesh network, allowing for complex network configurations without needing cabling in all points.

Designed for Central Management

The Vigor 2763 series can be centrally managed along with VigorAP's and switches, with the VigorACS central management platform.

This scalable solution provides visibility, control and reporting of your entire DrayTek product estate, ideal for dealers/SIs managing customers' devices or any user who wants to know what's going on with their devices. VigorACS also provides features like automated/bulk firmware updates, VPN management and alarms for connectivity or other issues.

For full details of VigorACS, click here.

Robust & Comprehensive IPv4 / IPv6 Firewall

Security is always taken seriously with DrayTek routers. The firewall protects against attacks including DoS (Denial of Service) attacks, IP-based attacks and access by unauthorised remote systems. Wireless, Ethernet and VPN are also protected by various protection systems.

The DrayTek object-based firewall enables you to create combinations of Firewall rules and Content Filtering to suit a home or small office environment, applying Content Filtering to the whole network, only specified devices or just the network that guests can connect to.

The Vigor 2763 supports both IPv4 and IPv6 with Dual-Stack IPv4/IPv6. Advanced networking features, such as the object-based Firewall, Quality of Service, Content Filtering and VLANs support both IPv4 and IPv6 networks.

Web Content Filtering with DNS Filter

GlobalView Categories

The content control features of the Vigor 2763 allow you to set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists or blacklists, blocking IM/P2P applications or other potentially harmful or wasteful content. Restrictions can be per user, per PC or universal and according to time schedules.

Content filtering can also block sites using HTTPS/SSL where URLs are encrypted (and normal routers cannot block).

Using the GlobalView service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day trial is included with your new router.

DrayDDNS - DrayTek Dynamic DNS Address

DrayTek provides a free Dynamic DNS address to each Vigor 2763 router, allowing you to link the router's current IP address to a memorable "drayddns.com" hostname, such as "vigor2763.drayddns.com".

DrayTek DrayDDNS with LetsEncrypt Certificate

This address automatically updates whenever the Internet connection's IP changes, so if one WAN’s IP address allocation is dynamic, or the IP changes when switching from the primary WAN connection to a backup, you can easily locate and access your Vigor 2763 router. Just use the hostname to access the router's VPN services, management and any other services you have made accessible through the router.

The Vigor 2763 can also authenticate your DrayDDNS hostname with free SSL/TLS certificates provided by LetsEncrypt, the router manages and automates the certificate process. Keeping the certificate up to date and ready for use with SSL VPN and other services.

Quality of Service with App QoS

Prioritise latency-sensitive applications on your network with Quality of Service.

App QoS simplifies setting up Quality of Service significantly, simply select which applications or services to prioritise, such as Zoom and Skype.

Use 4 separate queues to give priority to servers & PCs (IP address), services such as VoIP or DNS, or packet tagging used by IP phones with 802.1p and DSCP support

Auto Voice VLAN allows the router to automatically prioritise VoIP calls as they pass through the router without additional configuration.

Control throughput with Bandwidth Limit, by setting speed limits for all clients individually, groups of IPs, or a shared bandwidth limit for a whole subnet, such as a Guest network.

Multi-Purpose USB Ports

USB 4G modem connected to Vigor 2763

The Vigor 2763 has two USB ports which can be used for 4G/LTE modem, USB temperature sensor, storage, or a printer for shared access.

Connect a USB 4G/LTE modem to the Vigor 2763 and use mobile broadband as your Internet connectivity. That can be your primary connection or the router can switch over to 4G, in the case of ADSL/VDSL outage so that you're always connected.

Use your Vigor 2763 as a network attached storage (NAS) by connecting a USB flash drive or hard drive. With Windows networking (SMB) & FTP connectivity to allow Windows, Apple, Android and Linux devices to access the router's storage, locally and through VPN.

Central AP Management

The DrayTek Vigor 2763 series routers can manage 2 DrayTek VigorAP access points with Central AP Management profiles, with an option to Auto Provision - auto configuring newly installed VigorAP access points with the Auto Provisioning profile, upon initial connection to the DrayTek Vigor router's network.

This enables you to centrally control, manage and administer a full DrayTek network installed around the home or office, through the router's web interface. Ideal for local or remote management.

For further details of the central management feature, click here.

MPN
V2763AC-K
Vendor
Draytek
Product Enquiry
Product Name
Vigor 2763ac SoHo Router firewall with 802.11ac Wi-Fi
Product SKU
285579