Cablenet IP30 Industrial Gigabit 1 Port + 2 SFP Media Converter

PLANET IGT-1205AT is an Industrial Gigabit Media Converter providing non-blocking wire-speed performance and great flexibility for Gigabit Ethernet extension in harsh industrial environment. It is equipped with one 10/100/1000Base-T RJ-45 copper and two 100/1000Base-X SFP fibre optic interfaces delivered in an IP30 rugged strong case with redundant power system. The IGT-1205AT is well suited for applications in deploying surveillance system, and securing control and wireless service in climatically demanding environments with wide temperature range from -40 to 75 degrees C.

The two SFP slots are compatible with 100Base-FX or 1000Base-SX / LX / WDM through SFP (Small Form Factor Pluggable) fibre-optic transceivers. The fibre optic uplink capability guarantees the throughput to all nodes hooked into the network and the Gigabit Ethernet distance can be extended from 550 meters (Multi-mode fibre cable) up to 10/20/30/40/50/70/120 kilometres (Single-mode fibre cable), and also the Fast Ethernet distance can be extended from 2km (Multi-mode fibre cable) up to 20/40/60 kilometres (Single-mode fibre cable). They are well suited for applications within the factory and data centre

1 x 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function
2 x SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured
Link status auto-detect and redundant on dual ports with the same connector type
Only Primary-Port is active at a time, the Backup-Port is blocked
When Primary-Port link failure occurs, the traffic will swap to Backup-Port automatically
Once the Primary-Port status is back to link-up, the traffic will swap from Backup-Port to Primary-Port
Supports auto negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full duplex)
9K Jumbo Frame Size support
Integrated address look-up engine, support 1K absolute MAC addresses
Automatic address learning and address aging
Slim IP30 metal case protection
DIN rail and wall mount design
Redundant Power Design - 12 to 48V DC, redundant power with polarity reverse protect function, AC 24V power adapter acceptable
Supports EFT protection 6000 VDC for power line
Supports 6000 VDC Ethernet ESD protection
-40 to 75 degrees C operating temperature

SEE TECHNICAL DATA SHEET FOR FULL DETAILS