Cablenet Loaded Fibre Patch Panel OM3/OM4 48 Fibre - 24 x LC Duplex
Loaded OM3/OM4 multimode fibre patch panel providing a 48 fibre LC patching interface via 24 x LC duplex adaptors. The duplex format keeps each Tx/Rx pair together for cleaner labelling and tracing, while providing a clear rack-face handover between fixed fibre runs and patch leads for re-patching and testing without disturbing rear routing. Passive adaptor panel only with no switching or signal processing; performance depends on the fibre system, patch leads and connector cleanliness.
SKU
356853
MPN
XXFLPP48LC4
EAN
5056750340373
- Loaded OM3/OM4 fibre patch panel
- 48 fibre presentation (24 x LC duplex)
- LC duplex format keeps Tx/Rx paired
- Rack-face handover for patching and testing
- Passive adaptor interface (no signal processing)
In Stock
Qty Available: 17
OM3/4 Multimode Loaded Fibre Patch Panel to accept 48 fibres connecting to 24 LC duplex adaptors.
Capacity can be increased by removing the blanking plugs and replacing with the appropriate adaptor.
The Maxxam Loaded Fibre Patch Panels have been developed to help save time and money when on site. The panels are supplied with the adaptors installed in the front plate and the front plate subsequently mounted on to the panel chassis. The 19-inch mounting brackets are also fitted to the panel chassis so that the panel is ready to be mounted into the rack or cabinet. The panels are supplied with cable glands, bunny clips and splice cassettes and any unused ports are fitted with blanking plugs.
The fibre panels are available with Multimode (OM3 or OM4) or Singlemode adaptors and are configured for 4 to 96 fibres with LC adaptors or 8 to 48 fibres with SC adaptors.
Capacity can be increased by removing the blanking plugs and replacing with the appropriate adaptor.
The Maxxam Loaded Fibre Patch Panels have been developed to help save time and money when on site. The panels are supplied with the adaptors installed in the front plate and the front plate subsequently mounted on to the panel chassis. The 19-inch mounting brackets are also fitted to the panel chassis so that the panel is ready to be mounted into the rack or cabinet. The panels are supplied with cable glands, bunny clips and splice cassettes and any unused ports are fitted with blanking plugs.
The fibre panels are available with Multimode (OM3 or OM4) or Singlemode adaptors and are configured for 4 to 96 fibres with LC adaptors or 8 to 48 fibres with SC adaptors.
Vendor
Cablenet
MPN
XXFLPP48LC4
EAN
5056750340373
Weight
4.200000
Cable Types Supported
Fibre
Ports Quantity
48
Connectors
LC Duplex
Rack Capacity
1U
Product Colour
Black
Quantity Per Pack
1 pc(s)
Piece Qty
1
Piece Gross Weight
4.2 KG
Piece Height (mm)
390
Piece Length (mm)
500
Piece Width (mm)
80
Piece Height (mm)
390
Piece Length (mm)
500
Piece Width (mm)
80






